Wire Cup Brush
CODE 510761-510787
1.Designed for high speed operation on pneumatic or electric scaling and sanding machines.
2.These brushes remove rust and scale from metal, clean tanks and boat hulls, take off old paint, and clean castings and structural metal.
3.Threaded nut type and welded shaft types are available.
4.When ordering, please specify the type of fitting required on the cup brush and the inner diameter of the bolt fitting.
Whenever ordering wire brushes be certain that they will not be used on machines with speeds higher than the maximum safety speed shown for the brush.
| CODE | Type | Cup(Wheel ) O.D.mm*Arbor(Inch) | Thickness |
| 510761 | Standed Cup | 75×5/8 | 25mm |
| 510762 | 100×5/8 | 30mm | |
| 51076202 | 100mm×M14X2 | ||
| 510763 | 150×7/8 | 40mm | |
| 510766 | Knot Type Cup | 75×5/8 | 25mm |
| 51076601 | WIRE CUP BRUSH KNOT TYPE,75mm × M14×2 | ||
| 51076602 | WIRE CUP BRUSH KNOT TYPE Twisted style 75mm × M10 × 1.5 | ||
| 510767 | 100×5/8 | 30mm | |
| 510768 | 150×7/8 | 40mm | |
| 510771 | Standare Wheel | 75*3/8 | 15mm |
| 510772 | 100*5/8 | 17mm | |
| Brush Wire Wheel Standare 100mm×3/8 (different size, same #) | |||
| 510773 | 125*1/2 | 17mm | |
| 510774 | 150*3/4 | 25mm | |
| 51077401 | Brush Wire Wheel Standare 150mm×3/4 (different size, same #) | ||
| 510775 | 200*3/4 | 25mm | |
| 510776 | 250*1 | 25mm | |
| 510777 | 300*1 | 25mm | |
| 510785 | Wire Cup Brush Crimped Threaded Nut; Type 75 × M10 Thread | ||
| 51078501 | Wire Cup Brush Crimped Threaded Nut; Type 100 × M14 Thread | ||
| 510786 | Wire wheel brush standard on shaft - 50mm x arbor 6mm | ||
| 510787 | CRIMPED WIRE CUP BRUSH STEEL 50mm with shank 6mm | ||
| 51078701 | Wire Wheel Brush, Shaft Welded Type, Cup Shape, OD 50 mm With 6 mm Arbor | ||